Resumen
The SDM-SIO4A is a serial I/O expansion module for Campbell Scientific dataloggers. It is designed to add four additional and individually configurable and addressable RS-232, RS-422, or RS-485 (half- or full-duplex) serial ports to an SDM-capable datalogger for the purposes of interfacing with intelligent sensors, actuators, or displays. Up to three SDM-SIO4A modules can be connected to a single datalogger SDM port. The SDM-SIO4A channels behave much like a native datalogger serial port and use the same familiar serial I/O commands. The SDM-SIO4A is transient and surge protected to IEC61000-4-5 level 4 on the serial port interfaces, avoiding the need for separate transient protection in most applications.
Note: The SDM-SIO4A is not a direct replacement for the SDM-SIO4. The SDM-SIO4A consists of four SDM-SIO1A modules in a single package. Consequently, the SDM-SIO4A is a good replacement for up to four SDM-SIO1 modules or as an alternative to the SDM-SIO1A.
Leer másVentajas y características
- Easy and compact method to add up to 12 additional serial ports to an SDM-capable Campbell Scientific datalogger
- Total conformidad con los estándares RS-232, RS-422, y RS-485 (half- y full-duplex)
- Capacidad de mantener grandes cantidades de datos del sensor serie en el buffer entre el procesado de tareas del datalogger
- Compatible con el modo terminal "talk-through", que permite comprobar y diagnosticar el dispositivo serie
- Incluye protecciones contra transitorios y descargas en el interface puerto serie, lo cual evita tener que adquirir a parte un protector contra sobretenciones.
- Bajo consumo en reposo, ideal para estaciones alimentadas por batería
Imágenes
Ficheros CAD:
Descripción detallada
The SDM-SIO4A connects to multiple remote serial devices using industry-standard hardware that can be set to true RS-232, RS-485, or RS-422 signal levels. When operating in RS-232 mode, the channel also supports hardware handshaking. RS-422 mode is functionally the same as RS-485 mode, except the connection is limited to a point-to-point system. Connections and programming for RS-422 are otherwise identical to RS-485.
The SDM-SIO4A will accept serial data up to 6143 bytes and store it in its buffer. This allows remote equipment to transmit large amounts of data without needing to stop other processes in the datalogger.
Up to 3 SDM-SIO4A modules can be connected to a single datalogger using the SDM port, allowing a user to connect 12 different serial devices to a datalogger with ease. This is in addition to any connections made to the dataloggers via other serial ports.
Especificaciones
| Function | Expands the number of serial devices that can communicate with a data logger. |
| Number of Channels | 4 |
| Supported Data Rates | 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 bits/s |
| Supported Modes of Operation |
|
| Supported Data Format |
|
| Auto Baud Rate Detection | Auto baud rate detection is NOT supported. |
| PakBus Communications | Use of the serial port for general PakBus communications is not currently supported. |
| Voltage |
|
| Operating Temperature | -40° to +70°C (standard) |
| Humidity | 0% to 95% (non-condensing) standard |
| Mounting Holes | Two spaced 17.78 cm (7 in.) apart |
| Mounting Clips | Optional DIN rail mounting clips are available, which can be fitted to the base of the case. |
| EMC Compliance | The SDM-SIO4A has been tested and shown to comply with IEC 61326. The device incorporates transient and surge protection that is designed to meet IEC61000-4-5, level 4, providing the device is adequately grounded. |
| Dimensions | 6.4 x 15.45 x 2.2 cm (2.51 x 6.09 x 0.86 in.) excluding mounting tabs |
Buffer Sizes |
|
| -NOTE- | Both transmit and receive buffers are fill and discard type. That is, after the buffers become full, no new information is accepted, and all further data is discarded until space is made when the data logger requests data from the SDM-SIO4A. |
| Transmit Buffer Size | 767 bytes (buffer from the data logger to the sensor) |
| Receive Buffer Size | 6143 bytes (buffer from the sensor to the data logger) |
Current Consumption |
|
| Active Current | 9.6 to 11.7 mA (depending on transmit mode and connections made) |
| Standby Current |
|
Compatibilidad
Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.
Dataloggers
| Producto | Compatible | Nota |
|---|---|---|
| CR1000 (retired) | ||
| CR1000X | ||
| CR200X (retired) | ||
| CR216X (retired) | ||
| CR300 (retired) | ||
| CR3000 (retired) | On the CR3000, SDMs are connected to the ports labeled SDM-C1, SDM-C2, and SDM-C3. | |
| CR310 | ||
| CR350 | ||
| CR5000 (retired) | The CR5000 is compatible with the SDM-SIO4A, but the operating system must be OS 6 or higher. On the CR5000, SDMs are connected to the ports labeled SDM-C1, SDM-C2, and SDM-C3. | |
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000X (retired) | The CR9000X's operating system must be OS 6 or higher. |
Información de compatibilidad adicional
Datalogger Considerations
The SDM-SIO4A does NOT support auto baud rate detection nor the use of the serial port for general PakBus communications.
Compatible Contemporary Dataloggers
| CR200(X) Series | CR800/CR850 | CR1000 | CR3000 | CR7X | CR9000X | CR6 | CR300 Series |
 |
|
* |
† |
|
Note:
*On the CR3000, SDMs are connected to the ports labeled SDM-C1, SDM-C2, and SDM-C3.
†The CR9000X's operating system must be OS 6 or higher.
Compatible Retired Dataloggers
The CR5000 is compatible with the SDM-SIO4A, but the operating system must be OS 6 or higher. On the CR5000, SDMs are connected to the ports labeled SDM-C1, SDM-C2, and SDM-C3.
Compatible Edlog Dataloggers
None of our Edlog dataloggers are compatible with the SDM-SIO4A.
Enclosure Considerations
The SDM-SIO4A requires a desiccated, non-condensing environment; a Campbell Scientific enclosure is recommended. The SDM-SIO4A has built-in keyhole flanges for mounting to the backplates of Campbell Scientific enclosures.
Compatible Enclosures
| ENC10/12 | ENC10/12R | ENC12/14 | ENC14/16 | ENC16/18 |
|
|
|
|
|
Documentos
Folletos producto
Descargas
SDM-SIO1A / SDM-SIO4A OS v.3.0 (401 KB) 10-01-2024
Current firmware for the SDM-SIO1A and SDM-SIO4A.
Casos de aplicación
Overview The National Weather Observation Network in Croatia, led by the Croatian Meteorological and Hydrological Service......leer más