The RAD06 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement.
Note: In the image, the RAD06 is mounted to a crossarm with a thermistor.
Leer másThe RAD06 houses one 107, 108, 109, CS215, or HMP60 probe. The probe fits in the bottom of the shield and is held in place with a foam-lined gland.
The RAD06 includes a 2 in. U-bolt with a plastic V-block. The U-bolt is placed in the holes on the side of the bracket for attachment to a mast or vertical pole. The U-bolt is placed in the holes on the bottom of the bracket for attachment to a crossarm.
Construction | UV-stabilized white thermoplastic plates, aluminum mounting bracket, white powder-coated stainless-steel U-bolt clamp |
Plate Diameter | 12.3 cm (4.84 in.) |
Height | 14.2 cm (5.59 in.) |
Peso | 870 g (1.92 lb) |
Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.
Producto | Compatible | Nota |
---|---|---|
107 | ||
108 | ||
109 | ||
43347 | ||
CS215-L (retired) | ||
HC2S3 (retired) | ||
HMP155A-L | ||
HMP45C-L (retired) | ||
HMP50-L (retired) | ||
HMP60 |
The RAD06 attaches to a crossarm, mast, or user-supplied pipe with a 1.0 to 2.1 in. OD.
107 | 108 | 109 | 43347 |
CS215 | HMP60 | HMP155A | HC2S3 |
HMP50 | CS500 | HMP35C | HMP35A | HMP45C |