27814 CD100 Installed in Enclosure Lid

Resumen

When you purchase the 27814 you are ordering the CD100 mountable display with keypad, factory-installed in an enclosure lid. The 27814 must be ordered at the same time as a standard or prewired enclosure. When you purchase an enclosure and the 27814, Campbell Scientific will install the CD100 in the enclosure lid before the enclosure leaves the factory. The price includes the CD100.

Note: The enclosure is not included with the 27814 and must be ordered separately.

Leer más

Imágenes

27814 (CD100 installed in an enclosure lid)
27814 (CD100 installed in an enclosure lid)
27814 (CD100 installed in an enclosure lid)
27814 (CD100 installed in an enclosure lid)
27814 (CD100 installed in an enclosure lid) and mounted to a pole (sold separately)

Descripción detallada

The CD100 keypad with display provides the same operation and functionality as the CR1000KD. It allows you to check the datalogger's status, to view or plot sensor readings and stored values, and to enter numeric data or change ports.

The design of the CD100’s 16-character keypad permits operation with a gloved hand. Its vacuum fluorescent display is responsive through a wide operating-temperature range, and can show 8 lines by 21 characters (64 by 128 pixels). The CD100 is both water- and dust-protected, providing an IP66 rating when installed in the enclosure lid.


Especificaciones

Display 8 line x 21 character (64 x 128 pixel)
Keypad 16 key, alphanumeric
Power Requirements Powered from the data logger's CS I/O port
Water & Dust Ingress Protection Rating IP66 (when installed in enclosure lid)
Compliance CE compliant
Current Drain
  • negligible (0.02 mA) inactive
  • 140 mA (active)
Operating Temperature Range -45° to +85°C
Storage Temperature Range -50° to +85°C
Transit Temperature Range -60° to +85°C (1 hr)
Dimensions 17.5 x 13.7 x 3.6 cm (6.9 x 5.4 x 1.4 in.)
Weight < 0.5 kg (< 1 lb)

Compatibilidad

Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.

Dataloggers

Producto Compatible Nota
CR1000 (retired)
CR200X (retired)
CR216X (retired)
CR3000 (retired) The CR3000's integrated keyboard display is preferable for most situations. A special data logger OS is required to use the CR3000; contact Campbell Scientific for more information.
CR5000 (retired)
CR800 (retired)
CR850 (retired)
CR9000X (retired)

Documentos