Resumen
The 1017 Nu-Rail® Crossover Fitting attaches a 0.75 in. IPS pipe to another 0.75 in. IPS pipe. The most common use of the 1017 is on our 019ALU Crossarm. A listing of sensors commonly used with the 019ALU appears in the Compatibility information.
Leer másImágenes
Descripción detallada
The 1017 NU-RAIL® Crossover Fitting connects a vertical 3/4" IPS pipe to a horizontal 3/4" IPS pipe. It typically attaches a sensor with a 3/4” IPS pipe mount to a 019ALU crossarm.
The 1017 has two ovoid segments that are oriented at a 90° angle. Each segment accepts one piece of pipe allowing a vertical pipe to be secured to a horizontal pipe. The horizontal and vertical pipes are secured to the 1017 fitting using screws, which are tightened with an Allen wrench.
Especificaciones
| Dimensions | 6.35 x 8,89 x 7.62 cm (2.5 x 3.5 x 3.0 in.) |
| Weight | 136.1 g (0.3 lb) |
Compatibilidad
Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.
Sensores
| Producto | Compatible | Nota |
|---|---|---|
| 03001-L (retired) | ||
| 03002 | ||
| 034B | ||
| 05103 | ||
| 05108-L | ||
| 05305-L | ||
| 27106T | ||
| CSAT3 (retired) | ||
| WINDSONIC1 | ||
| WINDSONIC4 |
Miscelaneo
| Producto | Compatible | Nota |
|---|---|---|
| 014A | ||
| 05108-45-L |
Información de compatibilidad adicional
Sensors
The 1017 compatible with sensors that have a 0.75 in. IPS pipe mount (1.05 in. OD).
Pipe
The 1017 is compatible with user-supplied pipe that has a 0.75 in. IPS (1.05 in. OD).