CM230 Mordaza con inclinación ajustable

Resumen

The CM230 is an adjustable mount to point directional antennas or sensors at a specific target. The inclination can be adjusted to any angle from horizontal to vertical, supporting the use of upward-directed antennas or downward-directed infrared thermometers or snow-depth sensors.

Leer más

Imágenes

Included hardware of the CM230
Included hardware of the CM230
Included hardware of the CM230
CM230 with poles (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to a rain gage (sold separately)

Descripción detallada

The CM230 is typically attached to the mast of one of our tripods or towers, or in some applications to a user-supplied pipe. (See the Compatibility information.)

Especificaciones

Material 12 gage, 304 stainless steel
Wind Can withstand 241.4 kph (150 mph) wind with ice
Dimensiones 7.62 x 9.53 x 8.89 cm (3.0 x 3.75 x 3.5 in.)
Peso 0.34 kg (0.75 lb)

Compatibilidad

Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.

Equipos para montajes

Producto Compatible Nota
CM202
CM204
CM206

Información de compatibilidad adicional

The CM230 will accept antennas and sensors with a 1.0 in. to 1.5 in. outer diameter. The bracket can be attached to a mast or pipe with a 1.3 in. to 2.1 in. outer diameter. The declination of the antenna is fixed when the U-bolts attached to the tripod are tightened; the inclination of the antenna or sensor can then be adjusted with the other set of U-bolts and nuts.

Pipe

The CM230 is compatible with a 0.75 to 1.0 in. pipe size (1 to 1.5 in. OD) on the adjustable-angle side and a 0.75 to 1.5 in. pipe size (1 to 2 in. OD) on the fixed-angle side.

Documentos