Ensure ideal conditions in enclosures
Resumen
The CS210 enclosure humidity sensor measures relative humidity levels inside environmental enclosures. The sensor is housed inside the enclosure. A Campbell Scientific datalogger measures this sensor and stores its data.
Leer másVentajas y características
- Permite monitorizar la HR del armario de forma remota
- Used to schedule desiccant replacement
Imágenes
Descripción detallada
When CS210's measurements indicates that the RH level inside the enclosure is 40% or more, the desiccant should be replaced with another packet.
By having the datalogger measure the sensor, the measured values can be incorporated into the transmitted data stream of remotely located dataloggers. The probe has an 11-in. (28 cm) cable length, which should be adequate to place the probe near the enclosure conduits.
Preguntas frecuentes
Número de FAQs relacionadas con CS210: 3
Compatibilidad
Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.
Dataloggers
| Producto | Compatible | Nota |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000 (retired) | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR300 (retired) | ||
| CR3000 (retired) | ||
| CR310 | ||
| CR350 | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | ||
| CR9000X (retired) |
Especificaciones
| Sensor | Elan HM2000 series precision bulk-polymer |
| Relative Humidity Measurement Range | 0 to 100% (non-condensing) |
| RH Output Signal Range | 0 to 1.0 Vdc |
| Precisión | ±3% RH (10 to 90% RH) (at 25°C) |
| Typical Long-Term Stability | Better than 3% RH per year |
| Tiempo de respuesta | 10 seconds for a 30% to 90% RH step change (at 25°C, 90% response) |
| Consumo | < 0.5 mA |
| Voltaje alimentación | 5 ± 0.25 Vdc |
| Tiempo asentamiento | 10 s |
| Rango temperatura funcionamiento | 0° to 50°C |
| Longitud de cable | 27.9 cm (11 in.) |
| Sensor Head Dimensions | 2.5 x 1.3 x 0.8 cm (1.0 x 0.5 x 0.3 in.) |
| Peso | 9 g (0.3 oz) |
Casos de aplicación
In 2022, as Hurricane Fiona unleashed relentless rain on Puerto Rico, the Puerto Rico Landslide......leer más
Figura en
- ENC14/16 - Armario 406 x 356 x 140 mm
- ENC10/12 - Armario 305 x 254 x 114 mm
- ENC8/10 - Weather-Resistant Enclosure, 8 x 10 inches (203 x 254mm)
- ENC12/14 - Armario 356 x 305 x 140 mm
- PWENC - Prewired Enclosures
- ENC16/18 - Armario 457 x 406 x 228 mm
- ENCTDR100 - Enclosure to Hold Datalogger, SDM8X50-N, and TDR200, 16 x 18 inches