BP7 Batería recargable sellada de 12V 7Ah con fijaciones y cable
For a CR6 or CR300-Series Datalogger
meteorología aplicaciones agua aplicaciones energía aplicaciones flujo gas y turbulencia aplicaciones infraestructuras aplicaciones suelo aplicaciones

Resumen

The BP7 is a rechargeable, 12 V, 7 Ah battery that can power a Campbell Scientific system that has components that have average power requirements, such as satellite transmitters. This battery is typically recharged with a panel or wall charger. 

Note: In the image, the BP7 is shown mounted.

Leer más

Ventajas y características

  • Permite alimentar los dataloggers con panel solar o 220Vac

Imágenes

BP7 mounting bracket in vertical mounting position
BP7 mounting bracket in horizontal mounting position

Descripción detallada

The BP7 is a 7 Ahr, sealed rechargeable battery. This battery is shipped with the following:

  • pn 17374 cable
  • pn 10508 enclosure mounting bracket
  • Four screws
  • Four grommets

The 17374 cable terminates in pigtails that attach to the datalogger's terminal strip or the MorningStar regulator (a component of the 25295 power supply).

When used with the CR200(X) series, remember that the 17365 is too large for the ENC200 enclosure. It can be housed in any of our standard environmental enclosures (e.g., ENC10/12, ENC12/14).

Preguntas frecuentes

Número de FAQs relacionadas con BP7: 2

  1. How can the age and condition of a sealed rechargeable battery be determined?

    Look for a stamp on top of the battery. The stamp should be in a date format of YYMMDDXX where:

    • YY is the year.
    • MM is the month.
    • DD is the day.
    • XX is the manufacturing plant.

    This indicates the age of the battery.

    To evaluate the condition of the battery:

    1. Charge the battery.
    2. Let the battery sit for a couple of hours.
    3. Measure the open circuit voltage to get an estimated indication of condition.
  2. If a fully charged 17365 battery is used without a wall charger or solar panel, how long will the 17365 continue to supply power to a datalogger?

    This depends on the current drain of the system. For more information, see the “Power Supplies” application note.

Visite la librería de FAQ

Especificaciones

Battery Type Sealed lead acid (SLA)
UL Approval File Number MH16464
Output Voltage 12 Vdc
Nominal Rating 7 Ah
Cable Length 45.7 cm (18 in.)
Dimensions 15 x 9.4 x 6.4 cm (5.9 x 3.7 x 2.5 in.)
Weight 2.72 kg (6 lb)

Compatibilidad

Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.

Equipos para montajes

Producto Compatible Nota
ENC10/12
ENC12/14
ENC14/16
ENC16/18
ENC200

Información de compatibilidad adicional

The BP7 is often used with dataloggers that include their own charging regulators, such as the CR200(X)-series and CR6. It is also used with the 25295 PWS100 Power Supply. 

Enclosure Considerations

The BP7 requires a desiccated, non-condensing environment; a Campbell Scientific enclosure is recommended.

Documentos

Folletos producto

Documentos técnicos