The CS605 is used in TDR100-based systems. This probe is recommended for typical soils (soil bulk conductivity ≤1.5 dS/m) and cable lengths of less than 15 m (measured from the tips of the probe's...leer más
The CS610 is used in TDR100-based systems, and it is recommended for typical soils (soil bulk conductivity ≤1.5 dS/m). Its RG8 cable allows the CS610 to have cable lengths longer than 15 m. The max...leer más
The CS630 is used in TDR100-based systems. This probe consists of a Santoprene head, three pointed rods, and a standard RG58 cable. The length of each rod is 15 centimeters, allowing the probe to be u...leer más
The CS635 is used in TDR100-based systems. This probe consists of a Santoprene head, three pointed rods, and a low-loss LMR200DB cable. The length of each rod is 15 centimeters, allowing the probe to...leer más
The CS640 is used in TDR100-based systems. This probe consists of a Santoprene head, three pointed rods, and a standard RG58 cable. The length of each rod is 7.5 centimeters, allowing the probe to be...leer más
The CS645 is used in TDR100-based systems. This probe consists of a Santoprene head, three pointed rods, and a low-loss LMR200DB cable. The length of each rod is 7.5 centimeters, allowing the probe to...leer más
This tool aids insertion of a CS605 or CS610 TDR probe in high density or rocky soils. The CS605G has rods of similar diameter and the same spacing as the CS605 and CS610. The tool can be driven into...leer más
Soil moisture sensors (sometimes referred to as volumetric water content sensors) measure the water content of soil. These sensors can be used to estimate the amount of stored water in a profile or ho...leer más