El panel solar SP10 de 10W permite recargar baterías. Su cable de 4.5m termina con hilos al aire para poder conectarlo a los terminales de nuestras fuentes PS150, PS200, reguladores CH150, CH200, o a dataloggers CR3000, CR5000, CR6, CR7, o CR9000X que incluyan la opción batería recargable. El SP10 tiene la potencia suficiente para utilizarse en la mayoría de aplicaciones. Permite de esta forma el funcionamiento desatendido de nuestras estaciones en lugares remotos sin la necesidad de disponer de 220Vac.
Leer másThe SP10 includes mounting hardware consisting of one pn 17492 U-bolt and matching nuts. The U-bolt has a 5.398 cm (2.125 in.) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75 in. to 1.5 in. IPS pipe [25.4 to 50.8 cm (1 to 2 in.) OD].
A 788 connector must be soldered onto the solar panel leads to use the SP10 with a 21XL rechargeable base.
Número de FAQs relacionadas con SP10: 2
Multiple SP10 solar panels can be used together if required. For assistance with this type of installation, contact Campbell Scientific.
Regulators control the current flowing to the battery and prevent the battery current from flowing to the charging source. These solar panels do not include an on-board voltage regulator, so a stand-alone regulator would be required to complete a power supply.
Typically, these solar panels are connected to a CH100, CH200, PS100, or PS200, as well as to the battery base of a CR3000 or CR5000. The PS100 and the PS200, as well as the battery base of the CR3000 and CR5000, include an internal regulator.
-NOTE- | Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases. |
Maximum Peak Power | 10 W |
Current at Peak | 0.59 A |
Maximum Allowable Wind Gust Speed |
|
Voltage at Peak | 16.8 V |
Cable Description | 20 AWG, 1-twisted pair |
On-board Regulator Included | No |
Cable Diameter | 6.35 mm (0.25 in.) |
Dimensions | 41.9 x 26.9 x 2.3 cm (16.5 x 10.6 x 0.9 in.) |
Weight | 2.1 kg (4.6 lb) |
Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.
Producto | Compatible | Nota |
---|---|---|
CR300 (retired) | The SP10 is compatible with the built-in regulator. | |
CR3000 (retired) | (The SP10 is compatible with the built-in regulator.) | |
CR310 | (The SP10 is compatible with the built-in regulator.) | |
CR350 | The SP10 is compatible with the built-in regulator. | |
CR6 | (The SP10 is compatible with the built-in regulator.) | |
CRVW3 | (The SP10 is compatible with the built-in regulator.) |
Producto | Compatible | Nota |
---|---|---|
BP12 | ||
BP24 | ||
CH150 | ||
CH200 | ||
CH201 | ||
PS150 | (The SP10 is compatible with the built-in regulator.) |
Producto | Compatible | Nota |
---|---|---|
PS200 | (The SP10 is compatible with the built-in regulator.) |
The SP10 is compatible with the CH150; the CH200; the CH201; or the regulator built into the PS150, PS200, CR6, CR3000, CR300, CR310, or CRVW3.
The SP10 is compatible with EnerSys Genesis NP series (such as PS200, BP12, BP24), EnerSys Cyclone Series, or Concorde Sun Xtender Series (such as BP84) batteries.