RAD10E 10-Plate Solar Radiation Shield for Larger Sensors

Resumen

The RAD10E, manufactured by MetSpec, is attached to a Campbell Scientific crossarm or mast. The RAD10E uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. This shield also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2 m s-1 (~4.5 mph)), giving a better measurement.

Leer más

Ventajas y características

  • Improved sensor protection from driving rain, snow, and insect intrusion
  • Lower self-heating

Imágenes

RAD10E
RAD10E
RAD10E
Side view of RAD10E and EE181-L (sold separately)
Section view of RAD10E and EE181-L (sold separately)
RAD10E and EE181-L attached to mounting pole (all sold separately)
RAD10E and EE181-L attached to mounting pole (all sold separately)

Descripción detallada

The RAD10E 10-Plate Solar Radiation Shield houses the EE181-L Temperature and Relative Humidity Probe. The probe fits in the bottom of the shield and is held in place with a foam-lined gland that tightens down around the probe.

The RAD10E includes a 5.08 cm (2 in.) U-bolt with a plastic V-block. The U-bolt is placed in the holes on the side of the bracket for attachment to a mast or vertical pole. The U-bolt is placed in the holes on the bottom of the bracket for attachment to a crossarm.

Especificaciones

Construction UV-stabilized white thermoplastic plates, aluminum mounting bracket, white powder-coated stainless-steel U-bolt clamp
Plate Diameter 12.3 cm (4.84 in.)
Height 20.8 cm (8.19 in.)
Weight 1.01 kg (2.23 lb)

Compatibilidad

Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.

Sensores

Producto Compatible Nota
EE181
HygroVUE10

Información de compatibilidad adicional

The RAD10E attaches to a crossarm, mast, or user-supplied pipe with a 2.54 to 5.334 cm (1.0 to 2.1 in.) OD.

Artículos y notas de prensa

Artículos boletín