Imagen no disponible

Resumen

This lithium battery is included in our CR9000(X), CR10X, and CR510 dataloggers. The 8025 powers the clock and RAM when the primary 12 Vdc power supply is not connected. The battery should be replaced when its voltage falls below 2.4 Vdc.

Preguntas frecuentes

Número de FAQs relacionadas con 8025: 1

  1. If a datalogger has not been used in a while and the internal battery is low, will the battery recharge if the datalogger is connected to a power supply? Or does the battery need to be replaced?

    The internal battery is not rechargeable. In the case of low internal battery voltage, data will only be maintained as long as a power supply is connected. Collect all data from the datalogger before disconnecting the power. Then, replace the internal battery.

    • For the CR800, CR850, CR1000, or CR3000 dataloggers, use the 13519 replacement lithium battery.
    • For the CR5000 datalogger, use the 13497 replacement lithium battery.
    • For the CR9000X and CR9000XC dataloggers, use the 8025 replacement lithium battery.

Visite la librería de FAQ

Especificaciones

Model CR2430
Capacity 270 mAhr
Self Discharge Rate 1% of capacity per year
Operating Temperature Range -20° to +60°C
Storage Temperature Range -40° to +60°C
Diameter 2.45 cm (1 in.)
Thickness 0.3 cm (0.12 in.)
Weight 4.54 g (0.01 lb)