Turbidez / OBS-5+
DESCATALOGADO ›
Este producto ya no está disponible. Algunos accesorios, recambios o servicios pueden todavía estar disponibles.
OBS-5+ Sistema monitorización de concentración de sedimentos suspendidos con sensor de presión
Services Available
Repair No
Calibration No
Free Support No

Resumen

The OBS-5+ monitors high sediment concentrations using an infrared laser and a proprietary dual photo-detection system (U.S. Patent No. 5,796,481). The probe transmits sediment concentration and depth to a PC via an RS-232 or RS-485 link. Data are also stored internally.

The OBS-5+ is ideal for monitoring dredging and site-remediation operations, determining dredge efficiency, providing data for sediment transport research, and supporting undersea mining and trenching.

(OBS® is a registered trademark of Campbell Scientific.)

Leer más

Ventajas y características

  • Se conecta directamente a un PC— no se requiere datalogger
  • Funcionamiento de hasta seis meses con tres pilas tipo C
  • Monitoriza concentraciones de sedimento altas (hasta 200g/l)
  • Registra 200.000 muestras de datos en la memoria flash del OBS-5+

Imágenes

Descripción detallada

The OBS-5+ has a Windows GUI that enables the user to generate and store sediment calibration tables, log data, program logging/sampling schemes, and graphically display data. Using the Windows GUI, an operator can calibrate the OBS-5+ with sediments, change electronics gain to optimize resolution, create as many as 15 unique sediment lookup tables, and store those tables in FLASH memory for future use. Users can complete the entire calibration process without spreadsheet calculations and curve fitting.

Advantage of Multiple Detectors

Unlike single-detector systems such as the OBS-3+, which cannot measure suspended solids concentration (SSC) levels greater than about 10 g l-1 (mud) and 100 g l-1 (sand), the OBS-5+ uses multiple detectors. With these detectors and an embedded controller, the OBS-5+ extends the measurement range of the sensor by a factor of about ten. 

The OBS-5+ projects a beam of near infrared (NIR) laser light into a water sample next to two photodetectors. Suspended particles scatter light from the beam onto the detectors and a microcontroller determines SSC from their photocurrents. Because the detectors are unequally spaced from the laser, the particle concentrations corresponding to the peak response are also unequal and after being calibrated with sediment, an OBS-5+ can measure and uniquely resolve sediment SSC values greater than the peaks in response.

The OBS-5+ has been used extensively to monitor dredging and mining operations in the US, EU, China, Vietnam, and Indonesia.

Reference

John Downing. 1998. Suspended Particle Concentration Monitor. U.S. Patent Number 5,796,481.

(OBS® is a registered trademark of Campbell Scientific.)

Especificaciones

Connector MCBH-8-FS, wet-pluggable
Wetted Materials 316 stainless steel, Delrin, and 20% GF polycarbonate
Rango temperatura funcionamiento 0° to 40°C
Rango temperatura almacenamiento -20° to +70°C
Infrared Wavelength 780 nm
Scattering Angles 105° to 165° (clean water)
Drift over Time < 30 ppm per month
Drift over Temperature < 200 ppm per °C
Maximum Sampling Rate 25 Hz
Maximum Data Rate 2 Hz
Data Capacity 8 MB
Maximum Number of Data Lines 200,000
Battery Capacity 8 Ahr
Maximum Battery Life 3,000 h
External Supply Voltage 6 to 18 Vdc
External Supply Current 55 mA
PC Interfaces RS-232/115 kbps, RS-485/115 kbps
Maximum Concentration Range
  • Concentration measurement range and accuracy depend on the sediment type.
  • 0 to 50 g l-1 (for mud)
    Mud is defined as D50 = 20 μm.
  • 0 to 200 g l-1 (for sand)
    Sand is defined as D50 = 250 μm.
Pressure Measurement Range 0 to 10, 20, 50, 100, or 200 m
Turbidity Measurement Range 0.4 to 1,000 NTU
Concentration Accuracy
  • 2% of reading (for mud)
  • 4% of reading (for sand)
Pressure Accuracy 0.5% of full scale
Turbidity Accuracy 1.5% of full scale
Maximum Submersion Depth 300 m (984 ft)
Diameter 6.0 cm (2.4 in.)
Longitud 38.0 cm (15 in.)
Peso 2.04 kg (4.5 lb)
Submerged Weight 1.02 kg (2.3 lb)

Accuracy
Sediment Concentration
  • 2% of reading (for mud)
  • 4% of reading (for sand)
Pressure 0.5% of full scale
Turbidity 1.5% of full scale

Compatibilidad

Field Cables

Campbell Scientific offers a choice of field cables used to connect the OBS-5+ to a PC for system configuration. The cables differ in their length (see Ordering Info).

Descargas

OBS-5+ Utility v.5.50 (11.3 MB) 23-04-2010

Utility for the OBS-5+ sensor.