Narrowband UHF/VHF Radios Used in narrowband RF (radio-frequency) telemetry systems

Telecomunicaciones / Narrowband UHF/VHF Radios

Acerca de Narrowband UHF/VHF Radios

UHF and VHF radio products are used in narrowband RF (radio-frequency) telemetry systems. These systems consist of a radio modem and low-powered transceiver at the remote station(s), and a transceiver connected to a modem or base station at the computer site. Up to 254 stations can be interrogated over a single UHF or VHF frequency.

Productos descatalogados
Documentos
FAQs

Gama de productos

AL200 ALERT2 Encoder, Modulator, and Sensor Interface

The AL200 is an ALERT2 encoder and modulator that provides ALERT2 and ALERT-concentration services. The AL200 meets the ALERT2 standard released and maintained by the National Hydrologic Warning Counc...leer más

RF320 VHF Radio Transceiver

The RF320 is a 136 to 174 MHz radio. Campbell Scientific’s RF320-series narrowband UHF/VHF radio transceivers provide a long-distance telemetry option for communicating with remote measurement s...leer más

RF321 UHF Radio Transceiver

The RF321 is a 400.5 to 416.5 MHz radio. Campbell Scientific’s RF320-series narrowband UHF/VHF radio transceivers provide a long-distance telemetry option for communicating with remote measureme...leer más

RF322 UHF Radio Transceiver

The RF322 is a 411 to 429 MHz radio. Campbell Scientific’s RF320-series narrowband UHF/VHF radio transceivers provide a long-distance telemetry option for communicating with remote measurement s...leer más

RF323 UHF Radio Transceiver

The RF323 is a 450 to 470 MHz radio. Campbell Scientific’s RF320-series narrowband UHF/VHF radio transceivers provide a long-distance telemetry option for communicating with remote measurement s...leer más

RF95A RF Modem

Note: The RF95A has been replaced by the RF500M modem. The RF95A remains available for customers with application-specific custom PROMS. Used with our RF300-series radios, the RF95A provides an RF co...leer más

Productos obsoletos

RF500M Radio Modem

Documentos

Documentos técnicos

Line of Sight Obstruction

Preguntas frecuentes

Número de FAQs relacionadas con Narrowband UHF/VHF Radios: 1

Can more than one antenna be connected to a single radio?

It is possible to connect two antennas to a single radio via a properly specified (operating frequency and power handling capability) two-way, 50 ohm RF power divider. One example of this type of power divider is offered by Pasternack. Note that using a device like this will induce additional losses into the system (3 to 4 dB, typically).

Visite la librería de FAQ