Armarios

Gama de productos

Armarios intemperie estándar

Armarios intemperie estándar

Prewired Enclosures

Prewired Enclosures

Enclosure Assembly and Wiring

Enclosure Assembly and Wiring

Preguntas frecuentes

Número de FAQs relacionadas con Armarios: 6

Expandir todoDesplegar todo

  1. What sizes do backplates come in?

    Backplates are available in sizes designed to fit in Campbell Scientific enclosures: 10 x 12 in., 12 x 14 in., 14 x 16 in., and 16 x 18 in.

  2. Does the enclosure have a mounting bracket inside to mount the datalogger?
    Yes. Each enclosure Campbell Scientific sells has a powder-coated backplate with holes on 1 in. centers that match the mounting flanges on our equipment for easy mounting.
  3. How can more of the putty used to seal the cable-entry conduit of the enclosure be ordered?

    The putty is shipped as part of the 7363 Enclosure Supply Kit. To order an additional 4 ounce container of electrician’s putty, specify pn 6596.

  4. What is the preferred method for punching a clean hole through the bottom of an enclosure?
    Use a router with a fine-toothed bit. A hole saw will also work, but the edges will not be as clean as from using a router.
  5. Can just the backplate of an enclosure be purchased?

    Yes. In the Ordering information area of the enclosure's web page, navigate to the Replacement Parts section. The Universal Backplate for the enclosure is listed there.

  6. Can a display be put on the outside of an enclosure?

    Yes. The CD100 mounts in an enclosure door and supports all of the CR1000KD capabilities. With the CD100, historic and real-time data can be read, and instructions can be entered without opening the enclosure door.

    Other available options that display real-time data only are the CD295 and CD294.

Visite la librería de FAQ