ENC100 Barometer Enclosure

Resumen

The ENC100 is a small 6.7 by 5.5 in. enclosure designed to hold a barometer. It includes a backplate, compression fitting, vent, and mounting bracket. It may also be compatible with other small sensors or peripherals.

Leer más

Ventajas y características

  • Armario color blanco, estabilizado UV que refleja la radiación solar—reduciendo los gradientes de temperatura dentro del armario sin necesidad de un protector para la radiación

Imágenes

Descripción detallada

The ENC100 is typically used to house a barometer in its own enclosure. It includes a compression fitting for cable entry, a vent for equalization with the atmosphere, a backplate for mounting the barometer (or other small device), and hardware for mounting the ENC100 to a tripod, tower, or pole.

Preguntas frecuentes

Número de FAQs relacionadas con ENC100: 3

Expandir todoDesplegar todo

  1. Does the CS100 or CS106 fit inside an ENC100 enclosure?

    Either the CS100 or the CS106 can fit inside an ENC100. For more information, refer to the Specifications information on the ENC100 product page. 

  2. What factors affect the amount of desiccant needed in an enclosure?

    There is not an easy way to calculate how much desiccant is needed in an enclosure or how quickly the desiccant will need to be replaced. The following conditions affect the replacement interval:

    • How much humidity the enclosure is exposed to
    • The size of the enclosure
    • How often the enclosure door is opened and how long the door remains open
    • How airtight the enclosure is

    It may be advantageous to use more than one desiccant packet at a time inside an enclosure. Campbell Scientific recommends keeping an extra supply of desiccant on hand for as-needed replacement in the enclosure.

  3. When should the desiccant inside an enclosure be replaced?

    The desiccant should be replaced when the top colored dot on the humidity indicator card (pn 28878) turns pink; the humidity indicator card is included in the enclosure supply kit that is shipped with each enclosure. If the CS210, Enclosure Humidity Sensor, is used, replace the desiccant when the measured humidity exceeds 35%.

Visite la librería de FAQ

Especificaciones

Color White
Construction Polycarbonate
Backplate Prepunched with one-inch-on-center holes
Dimensiones
  • 15.9 x 12.7 x 6.1 cm (6.25 x 5 x 2.4 in.) internal
  • 17.1 x 14.0 x 9.9 cm (6.7 x 5.5 x 3.9 in.) external

Compatibilidad

The ENC100 can house one small device (typically a barometer).

Documentos