CRS456 Sensor con registro del nivel de agua (titanio)
Incluye memoria interna
Software fácil de usar,
equipo fiable
meteorología aplicaciones agua aplicaciones energía aplicaciones flujo gas y turbulencia aplicaciones infraestructuras aplicaciones suelo aplicaciones

Resumen

El CRS456 es un sensor con carcasa de titanio que mide el nivel y temperatura del agua; y que tiene su propio reloj y memoria internos para almacenar datos. Esto permite al usuario dejar el sensor en lugares remotos, para que recoja datos durante largos períodos de tiempo. Después el sensor se retira del agua, se conecta a un PC por su puerto USB, y se transfieren los datos al PC. La larga duración de la batería interna y su construcción robusta le permiten confiar con el CRS451 para que recoja importantes datos. Es una perfecta solución para múltiples aplicaciones por su bajo coste y facilidad de uso. 

Leer más

Ventajas y características

  • Sensores y captura de datos en un mismo instrumento
  • Robusta carcasa de titanio que protege el sensor piezoresistivo, permitiendo su uso en aguas marinas y otros ambientes duros
  • La calidad de su construcción asegura la fiabilidad del producto
  • Totalmente compensado en temperatura
  • Rápida velocidad de muestreo
  • Elevada capacidad de almacenamiento de datos
  • Larga duración de la batería
  • Software fácil de usar

Imágenes

Descripción detallada

The CRS456 has several pressure range options. The CRS456 is unvented; therefore it is monitoring sealed gage pressure. For maximum accuracy, the data should be corrected for barometric pressure. 

HydroSci software is included in the Resource DVD. This software simplifies the process of configuring the CRS456. Users can configure the CRS456 to monitor surface water, ground water, or a standard pump test.

HydroSci software will also compensate the measurements for barometric pressure using an additional CS456 or a CS451 as a reference sensor, or using a barometric pressure sensor from a nearby weather station.

HydroSci software will display the data in tabular or graphical formats.

Preguntas frecuentes

Número de FAQs relacionadas con CRS456: 1

  1. What is the nature of the reference pressure?

    The CRS451 and CRS456 are unvented and monitor sealed gage pressure. For maximum accuracy, the data should be corrected for barometric pressure. The barometric pressure data from a nearby weather station or other monitoring platform can be used.

Visite la librería de FAQ

Especificaciones

Venting Unvented
Measurement Time < 1.0 s
Output Options micro USB
Internal Data Collection Memory 4 MB
Logging/Scanning Modes Standard, Delta, Wave, Logarithmic
Resolution 0.0035% FS
Dry Storage Temperature Range -10° to +80°C
WARNING: Sensor could be damaged if encased in frozen ice.
Operating Temperature Range 0° to 60°C
WARNING: Sensor could be damaged if encased in frozen ice.
Overpressure 2 x pressure range
Power Requirements Internal user-replaceable lithium battery
Battery Life 5+ years (when logging interval is once per hour)
Body Material Titanium
Distance
  • 2.54 cm (1 in.)
    Distance from black line etched on housing to end of NPT fitting
  • 2.3 cm (0.9 in.)
    Distance from black line etched on housing to end of standard nose cone
  • 9.9 cm (3.9 in.)
    Distance from black line etched on housing to end of weighted nose cone
Water-Level Accuracy ±0.1% full-scale-range TEB
Includes the combined errors due to nonlinearity, hysteresis, nonrepeatability, and thermal effects over the compensated temperature range, per ISA S51.1.
Temperature Accuracy ±0.2°C
Ingress Protection Exceeds IP68
Diameter 2.22 cm (0.875 in.)
Length 22.23 cm (8.75 in.)
Weight 230 g (0.51 lb)

Power Consumption
Quiescent < 80 µA
Measurement/Communication 4 mA (1 s measurement)

Measurement Ranges at Fresh Water Depths
0 to 5.1 m (16.7 ft)
  • 0 to 7.25 psi
  • 0 to 50 kPa
0 to 10.2 m (33.4 ft)
  • 0 to 14.5 psi
  • 0 to 100 kPa
0 to 20.4 m (67 ft)
  • 0 to 29 psi
  • 0 to 200 kPa
0 to 50.9 m (167 ft)
  • 0 to 72.5 psi
  • 0 to 500 kPa
0 to 102 m (334.5 ft)
  • 0 to 145 psi
  • 0 to 1000 kPa

Compatibilidad

Communications

Requires a micro USB cable and HydroSci software running on a computer with Windows XP or later. HydroSci software is available for download.

Descargas

HydroSci Chinese Language v.1.2 (434 KB) 30-01-2017

Adds Chinese language support for version 1.2 of HydroSci.

Note: Language support for the above listed version only.

HydroSci v.1.2.1 (41.7 MB) 09-10-2017

HydroSci is used to configure and extract data from the CRS45X Recording Submersible Pressure Transducer and the OBS-3A Turbidity and Temperature Monitoring System.

Watch the Video Tutorial: Using HydroSci software with water-level recording sensors.

Historial revisiones

CRS OS v.2 () 28-05-2018

Current CRS541, CRS456, CRS451V and CRS456V Operating System.