Este producto ya no está disponible y ha sido reemplazado por: CR3000. Algunos accesorios, recambios o servicios pueden todavía estar disponibles.
| Services Available |
|---|
Resumen
The CR23X-4M could store over 2,000,000 data points.
The CR23X-4M Micrologger® was a portable, self-contained package. It consisted of measurement and control electronics, communication ports, keyboard, 2-line alphanumeric display, power supply, and a battery-backed clock. The CR23X-4M measured most sensor types directly, communicated via modems, reduced data, controlled external devices, and stored both data and programs in either non-volatile Flash memory or battery-backed SRAM.
Leer másVentajas y características
- Compact, self-contained datalogger
- El formato de los datos es tipo mixed array (por defecto) o tipo tabla
Imágenes
Descripción detallada
The CR23X-4M is a self-contained, rugged datalogger that can measure most sensor types directly, communicate via modems, reduce data, control external devices, and store both data and programs in either non-volatile Flash memory or battery-backed SRAM.
The CR23X-4M has an integral, 2-line, alphanumeric display and power supply. A battery-backed, real-time clock and 4M of nonvolatile data storage is included. The CR23X-4M Microloggers are available with a sealed rechargeable battery base, an alkaline base, or in a low-profile version without batteries.
Preguntas frecuentes
Número de FAQs relacionadas con CR23X-4M: 2
-
A practical maximum is to connect one multiplexer per every two control terminals on the datalogger. Control terminals can be shared between multiplexers to increase the number of connected multiplexers. Sharing terminals, however, requires more complex wiring and programming. Users who would like to connect more than one multiplexer per every two control terminals are advised to contact a sales or support engineer at Campbell Scientific for assistance.
-
E08 errors are occasionally created by voltage surges or transient voltages. Section 3.9 of the CR23X manual explains in greater detail what a watchdog is and possible causes. If these are happening frequently, it is likely an issue with the system that needs to be resolved. The first step in this resolution process would be to check the system power (inputs and outputs) and verify it is within the expected tolerances as outlined in the Specifications page (OV-23) of the CR23X Micrologger Operator's Manual.
Especificaciones
- Analog inputs: 24 single-ended or 12 differential, individually configured
- Pulse counters: 4
- Switched voltage excitations: 4
- Control/digital I/O ports: 8
- Continuous analog outputs: 2
- Serial I/O port (CS I/O): 1
- RS-232 Port: 1
- Scan rate: 100 Hz
- Burst mode: 1500 Hz
- Analog voltage resolution: to 0.33 uV
- A/D bits: 15
- Programming: Edlog
- Data Storage: Mixed Array, Table
- Telecommunications: Standard, Modbus, Alert
- Operating Temperature Range
- Standard: -25° to +50°C
- Extended: -40° to +80°C
- Display Temperature
- Corrected: -20° to +40°C
- survival: -40° to +85°C
Compatibilidad
A typical field-based CR23X-M system consisted of:
- CR23X-M Micrologger with specified Operating System and Alkaline, Rechargeable, or User-Supplied Power Supply
- Weatherproof Enclosure
- Communications Peripheral(s)
- Programming and Communications Software
- Sensors
- Data retrieval peripherals
Documentos
Folletos producto
Manuales
Descargas
CR23X OS v.1.19 (690 KB) 28-03-2006
Execution of this download installs the CR23X Operating System (Mixed-Array) on your computer.
Note: The Device Configuration Utility is used to upload the included operating system to the datalogger.
CR23X-TD OS v.1.15 (703 KB) 28-03-2006
Execution of this download installs the CR23X Table Data Operating System on your computer.
Note: The Device Configuration Utility is used to upload the included operating system to the datalogger.
CR23X-PB OS v.1.10 (706 KB) 28-03-2006
Execution of this download installs the CR23X PakBus Operating System on your computer.
Note: The Device Configuration Utility is used to upload the included operating system to the datalogger.
Device Configuration Utility v.2.30 (46.9 MB) 02-10-2024
A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus Graph and the Network Planner if they have been installed previously by another Campbell Scientific software package.
Supported Operating Systems:
Windows 11 or 10 (Both 32 and 64 bit)