CMB200 Crossarm Brace Kit

Resumen

The CMB200 Crossarm Brace Kit is designed to provide additional stability to the CM203, CM204, or CM206 crossarms mounted on Campbell Scientific tripods and towers. This kit provides support for crossarms with heavier or sensitive sensor loads, as well as added stability in higher winds. Each kit includes one brace arm and three sets of mounting brackets:

  • The small bracket (pn 31593) attaches the brace arm to a UT10/UT20/UT30 tower leg.
  • The medium bracket (pn 31592) attaches the brace arm to the CM203/CM204/CM206 crossarm.*
  • The large bracket (pn 31594) attaches the brace arm to the CM110/CM106B tripod mast or UT10 tower mast.
Mast/Crossarm/Tower Diameter Example Mast/Crossarm/Tower Brackets Needed Small Bracket Orientation

Ø1.00"

UT10/20/30 Tower Leg (Excludes bottom section of UT20/30)

Small Bracket (Qty: 1) Medium Bracket (Qty: 1)

Angled toward mast/tripod.

Ø1.25" or Ø1.31"

CM203/4/6 Crossarm, UT20/30 Tower Mast, UT20/30 Tower Leg (bottom section only)*

Small Bracket (Qty: 1) Medium Bracket (Qty: 1)

Angled away from mast/tripod.

Ø1.90"

CM110/106B Tripod Mast, UT10 Tower Mast

Large Bracket (Qty: 2)

Not applicable.

* Technically, the medium bracket can be used with the CM202, but Campbell Scientific does not recommend this usage.

Imágenes

CMB200 Crossarm Brace Kit
CMB200 Crossarm Brace Kit
CMB200 Crossarm Brace Kit
CMB200 Crossarm Brace Kit highlighted against other system components (sold separately)
CMB200 Crossarm Brace Kit attached to other system components (sold separately)

Preguntas frecuentes

Número de FAQs relacionadas con CMB200: 1

  1. Technically, the medium bracket (pn 31592) of the CMB200 Crossarm Brace Kit can be used with the CM202 crossarm, but Campbell Scientific does not recommend this usage.


Especificaciones

Material 304 stainless-steel pipe with 304 stainless-steel brackets
Outer Diameter 2.54 cm (1.0 in.)
Longitud 0.9 m (2.8 ft)