Trípodes / CM106K
Imagen no disponible
Resumen
The CM106K Tripod Kit contains the hardware necessary to construct a 3 m (10 ft) tripod. It is designed to save shipping cost by having the customer obtain steel pipe and a grounding rod locally. The kit contains the parts to assemble the pipes into a tripod, including feet, joints, bolts and nuts, lightning rod, and other parts. The customer obtains lengths of steel pipe and a copper ground rod from a local supply house. The CM106K is primarily intended for overseas shipments.
Especificaciones
| Vertical Load Limit | 45 kg (100 lb) |
| Leveling Adjustment | Clamp brackets on each leg adjust individually. |
| Maximum Slope Angle | 22° or 40% grade (Maximum slope angle assumes that one leg points downhill while the other two legs point uphill.) |
| Portability | Collapsible to 23 cm (9 in.) diameter by 2.54 m (100 in.) length. |
| Leg Base | 150 x 89 mm with one 21 mm hole for stakes (6 x 3.5 in. with one 0.84 in. hole for stakes) |
| Measurement Height | 3.0 m (10 ft) |
| Mast Outer Diameter | 48 mm (1.90 in.) |
| Base Diameter | 3.4 m (11 ft) |
| Weight with Mast | 30 kg (67 lb) |
Maximum Allowable Wind |
|
| -NOTA- |
Allowable sustained wind values assume the following:
|
| Sustained Wind |
|
| Wind Gust |
|