Imagen no disponible

Resumen

The CC5MPXCBL1 cable connects the camera to the power supply and is required to use the camera. This cable can also connect the camera to a datalogger COM port, MD485, or PC.

Leer más

Descripción detallada

The CC5MPXCBL1 cable connects the camera to the power supply and is required to use the camera. This cable can also connect the camera to a datalogger COM port, MD485, or PC.

Connection to the PC allows the camera to be configured via the Device Configuration (DevConfig) utility. To use DevConfig requires the DB9M-TERM or A200 interface. The DB9M-TERM interface is shipped with the CC5MPX camera.

Preguntas frecuentes

Número de FAQs relacionadas con CC5MPXCBL1: 1

  1. Is there a cable option for the CC5MPX that can interface to a cellular modem?
    This is done by sending images via PakBus to a Campbell Scientific datalogger with a cellular modem telemetry option. The cable that is used is the CC5MPXCBL1-L Power and I/O Cable, which provides power from the datalogger, as well as an RS-232 or RS-485 connection.
Visite la librería de FAQ